When your session is set up, you will see a session overview screen with a countdown to the session start time. Before your session begins, follow these steps so you're ready for the start time.
- Turn on your EDGE Units and wait for them to link to GPS.
- Turn on your Gateway by sliding the switch down to the on position (middle).
- Place your Gateway in the tripod with clamp, on the sideline of the pitch at the centre-point or half-way line.
IMPORTANT NOTE: The Gateway should have LEDs facing TOWARDS the field, with USB-C port at the BOTTOM. - Wait for the Gateway to link to the session and network. The light on the Bluetooth indicator will turn 🟢Green and you will see a ⚡ Lightning Bolt Icon on your EDGE Units.
- You can now place the EDGE Units into the players' vests and begin your session.
- TRAINING SESSIONS ONLY: Once your session is underway, you can create segments to split up the session drill-by-drill, via the segments tab. (see Live Session Segments guide).
- Once your session is complete, with all devices still turned on, bring your units and gateway together and allow for all data to collect and update in the app.