How to Connect your Units to GPS

This Guide will explain how to connect your units to GPS

Reminder — EDGE units only work outdoors

  1. Turn on your units using the green power button.

  2. Wait for the light on the units to change to green — this means a GPS signal has been acquired. 

  3. Give the units to the correct players so they record data on their assigned EDGE unit.
  4. Fit the EDGE unit into the PlayerData sports vest — make sure the display screen is facing outwards and the PlayerData logo is at the top.

  5. Make sure you turn the units off after the session to avoid any data being overwritten. 

NOTE: The first time using your units it make take up to 10 minutes to connect to GPS.