How to Connect your Unit to GPS

This Guide will explain how to connect your unit to GPS


  1. Make sure you are outside in an open area and turn on your unit using the green power button 
  2. Wait for the LED light to turn green- This means GPS signal has been acquired. 
  3. Fit your Edge unit into your vest - Make sure the display screen is facing outwards with the PD logo at the top. 
  4. Your unit is now recording your data, make sure you turn off your unit at the end of the session to avoid any data being overwritten. 

NOTE: If this is the first time using your unit it may take up to 10 minutes to connect to GPS